Planning and installation · Practical guide
Dresser drawer sticks under load. What to check
An empty dresser drawer may glide smoothly and then rub against the cabinet once it is filled. Start by locating the first point of contact. A comparison between the empty and normally loaded positions gives Dima a clearer picture of the repair.
Find the point where the drawer binds
Empty the drawer and move it gently through its normal travel once. If it only rubs just before closing, inspect the gaps around the front. If it slows halfway in, photograph both sides and the exposed parts of the runners at that position. A short video from the side shows whether one corner drops as the drawer moves. Stop if the drawer catches firmly.
Compare the drawer bottom and the load
Check whether the bottom has bowed or slipped out of its groove. Look at the left and right gaps when the drawer is empty. If the unit is stable, compare with a small everyday load placed evenly and within the model’s instructions. Photograph any change. If the unit rocks or the drawer is only supported on one side, leave it empty and arrange an inspection.
Identify the mechanism before buying a part
Take a photo of the furniture label and any readable markings on the runner. Parts of the same length can use different mounting and release systems. For example, IKEA’s MAXIMERA guidance distinguishes between positions in the cabinet when setting up and aligning drawers. Follow the document for your own product and check its stated load limit.
Describe what changed before the visit
Tell Dima whether the problem started after moving, assembling the furniture or putting heavier items inside. Point out any loose fixing, damage to the cabinet or cracked drawer bottom that is visible. Those details help separate an alignment job from a mounting repair or replacement of a runner pair.
Manufacturer documentation
What to send the handyman
- Furniture model and a wide view with the drawers closed.
- Both runners as seen at the normal opening position.
- Contact point and the condition of the bottom panel.
- A short video, usual contents and your city.
FIX&GO · animated advertisement
A random episode in English
Animated advertisement, not footage of an actual job. Muted autoplay; pauses when off screen.
Photos, measurements, product model and city help clarify the work before a visit.
Common questions
Should I sand the front edge?
Compare the gaps first. If the runner shifts under load, sanding the edge can leave damage while the underlying problem remains.
Will lubricant fix a drawer that sticks when filled?
Check the panel, gaps and fixings first. Use a lubricant only if the instructions for that runner call for one.
Do I need to take the drawer out to photograph it?
The exposed sections normally provide a useful starting point. Follow your model’s removal instructions if the drawer has to come out.
Prices and terms
Prices and terms · All services · Fix&Go service in your city · Articles