Planning and installation
Dresser drawer sticks under load. What to check
Find where a dresser drawer rubs when filled. Compare the empty and loaded positions, inspect the bottom and identify the runners before ordering parts.
Read article →FIX&GO · 130
Practical home installation guides
130 clear guides about curtain rods, TVs, furniture, mirrors, taps, lighting and everyday installation decisions.
FIX&GO
Browse all 130 guides
No guides found. Try another word or choose all topics.
Planning and installation
Wall-folding drying rack on a balcony. Check the opening space
Measure a wall-mounted drying rack in both positions. Check the opening path, access to doors and storage, and space for hanging wet laundry.
Read article →
Planning and installation
Mirror cabinet above a sink. Check the door clearance
Plan a bathroom mirror cabinet around door swing, cabinet depth, the light fitting and everyday access to the tap and basin.
Read article →
Planning and installation
Bathroom tap with a pop-up drain. Check the linkage clearance
Before changing a bathroom tap, identify how the stopper works and check the moving linkage against the trap, hoses and vanity drawers.
Read article →
Planning and installation
Microwave shelf. Check the support and ventilation
Assess a proposed microwave shelf against the appliance manual, total load, foot positions, ventilation, access and door movement.
Read article →
Planning and installation
TV in a recess: check ventilation and installation clearance
Plan a recessed wall-mounted TV using actual cabinet dimensions, the model instructions, bracket access and a safe route for removing the screen.
Read article →Planning and installation
Wardrobe on carpet: plan the base before assembly
Prepare for wardrobe assembly on carpet: final flooring, the model’s feet or plinth, door movement, wall anchoring and future floor changes.
Read article →
Planning and installation
Curtain rail by a shutter box: keep maintenance access clear
Plan a curtain rail near a roller-shutter box: maintenance cover movement, gathered fabric, controls and fixing locations before installation.
Read article →Planning and installation
A shelf for your router: access, ventilation and cable space
Plan a wall shelf for a router and network equipment: device sizes, plugs, power adapters and reachable connections without stretched cables.
Read article →Planning and installation
Two mirrors side by side: agree the gap and alignment first
Plan a pair of wall mirrors using actual frame dimensions, a chosen alignment line, the gap between them and access to each mirror’s fittings.
Read article →Planning and installation
Wall-mounted TV: keep HDMI and other ports accessible
Plan access to TV connections before installation: port direction, actual plugs, cable clearance and a practical way to service the screen.
Read article →Planning and installation
Curtain catches at a ceiling-track joint: what to check
Identify a repeat snag in a curtain track: rail alignment, the correct connector, supporting fixings and compatibility between parts.
Read article →Planning and installation
Wardrobe meets a skirting board: plan the wall gap before assembly
Measure skirting-board projection before wardrobe assembly: usable floor space, cabinet construction, door clearance and the specified wall restraint.
Read article →Planning and installation
Mirror behind an entrance door: check the opening arc first
Plan a mirror near a doorway with a paper template, handle clearance, the real frame projection and access to its mounting hardware.
Read article →Planning and installation
Kitchen tap in front of a window: check clearance before replacing it
Plan a kitchen tap beside an opening window: sash movement, product dimensions, lever travel and usable space below the sink.
Read article →Planning and installation
TV mounting on decorative wall panels: find the real fixing base
Plan a TV bracket on slats, MDF or decorative cladding: identify the substrate, cavity, fixing access and cable clearance before drilling.
Read article →Planning and installation
Curtain rod near an air conditioner: leave room for use and maintenance
Plan curtain installation beside an indoor air-conditioning unit: check curtain travel, filter access, airflow and the wall before drilling.
Read article →Planning and installation
Cabinet door slams: check the soft-close damper before replacing hinges
Identify why soft closing stopped working: separate dampers, integrated hinges, door alignment and the details needed to choose a compatible part.
Read article →
Planning and installation
Insect screens in homes with pets: mesh, frame and limitations
Plan screen replacement after pet damage: identify tears, check the frame and understand why insect mesh is not a fall-protection barrier.
Read article →Planning and installation
Flat-pack furniture is missing parts: what to check before assembly
Prepare IKEA or other flat-pack furniture assembly when hardware is missing or a panel is damaged: identify parts, photograph labels and agree the visit scope.
Read article →Bathroom fixtures
Mounting a towel rail and shelf on tile: layout and fixings
Plan a towel rail or bathroom shelf on a tiled wall: check grout lines, clearance, the substrate and possible service routes before drilling.
Read article →Water and plumbing
Replacing a shower hose: check threads, washers and leaks
Before replacing a shower hose, check its length, connections, washers and holder. What to inspect in advance and when to stop.
Read article →Balcony storage
Balcony storage cabinet: measure, assemble and check exposure
Prepare for balcony cabinet assembly: measure access, door swing, floor slope and ventilation, then check the manufacturer's use guidance.
Read article →Desks and workspaces
Fold-down wall desk: check the wall and opening clearance
Plan a fold-down wall desk installation: check the substrate, height, swing path, rated load and nearby furniture before drilling.
Read article →Furniture assembly
Office chair wobbles after assembly: what to check
If an office chair rocks or sits unevenly after assembly, check the base, casters, mechanism orientation and the tightening sequence.
Read article →TVs
TV opposite a window: choose a wall position with less glare
Planning a TV mount opposite a window? Check daylight, viewing height, outlets and the space a swivel bracket needs before drilling.
Read article →Curtains & windows
Curtain rod above a balcony door: keep the door opening freely
Before fitting a curtain rod above a balcony door, check the full door swing, bracket position, fabric stack and available height.
Read article →Water & taps
Pull-out kitchen tap: what to check below the sink
Replacing a pull-out kitchen tap? Check the cabinet space, hose movement, shut-off valves and supplied fittings before booking.
Read article →Furniture
Shoe cabinet in a narrow hall: assembly and stability
Before assembling a slim shoe cabinet, check the open-door depth, clear passage, floor and any manufacturer-required anti-tip fixing.
Read article →Mirrors & decor
Mirror above a dresser: mark the position before hanging
Hanging a mirror above a dresser? Check furniture height, spacing, reflections, mirror weight and wall material before drilling.
Read article →
Moving & planning
Moved into a new apartment: which jobs should be combined in one visit
Adjusting cabinet doors, tightening joints and replacing accessible hardware can resolve everyday problems. First determine whether adjustment is enough or a replacement part is needed. Electrical and gas work requires an appropriate specialist.
Read article →Moving & planning
Rental apartment: how to plan wall mounting without unnecessary holes
Layout depends on composition size, weight and hanging fittings. Groups of pictures benefit from an agreed marking plan. Heavy panels need an assessment of the substrate and mounting points.
Read article →Moving & planning
Which photos should you send for a clear estimate
Adjusting cabinet doors, tightening joints and replacing accessible hardware can resolve everyday problems. First determine whether adjustment is enough or a replacement part is needed. Electrical and gas work requires an appropriate specialist.
Read article →Moving & planning
Furniture delivery and assembly on the same day: how to avoid downtime
Wardrobe assembly covers the agreed work on the frame, shelves, doors and hardware adjustment. Hinged and sliding doors use different systems. Tall units require room to assemble and anti-tip anchoring according to instructions.
Read article →Moving & planning
Five small jobs or one large order: how to prepare a task list
Adjusting cabinet doors, tightening joints and replacing accessible hardware can resolve everyday problems. First determine whether adjustment is enough or a replacement part is needed. Electrical and gas work requires an appropriate specialist.
Read article →Mounting & storage
Can old holes be reused for new wall fixtures
Fixings depend on the wall, shelf design and intended load. Books and light decorations can require different mounting solutions. Concealed supports must match the shelf and suitable installation depth.
Read article →Curtains & windows
Heavy blackout curtains: will the existing rod support them
Wall-mounted rods require checking window width, bracket projection and curtain weight. Fabric should clear handles, sills and furniture. Long rods may need extra supports according to the manufacturer’s instructions.
Read article →Curtains & windows
Curtain rod pulling away from the wall: why tightening may not help
Wall-mounted rods require checking window width, bracket projection and curtain weight. Fabric should clear handles, sills and furniture. Long rods may need extra supports according to the manufacturer’s instructions.
Read article →Curtains & windows
Curtains catch the window handle: what to change during installation
Wall-mounted rods require checking window width, bracket projection and curtain weight. Fabric should clear handles, sills and furniture. Long rods may need extra supports according to the manufacturer’s instructions.
Read article →Curtains & windows
Curtain track and suspended ceiling: what to check before installation
Ceiling tracks can support a floor-to-ceiling curtain layout. The supporting substrate must be checked: concrete and suspended ceilings need different solutions. Rail spacing must allow fabric to move freely.
Read article →Curtains & windows
Sheer and blackout curtains: how to position two tracks
Ceiling tracks can support a floor-to-ceiling curtain layout. The supporting substrate must be checked: concrete and suspended ceilings need different solutions. Rail spacing must allow fabric to move freely.
Read article →Curtains & windows
Roller blind does not fit the opening: what to check
Ready-made blinds can mount inside or above the opening depending on the model. Width, fabric movement and access to controls are checked. Electrical connection of motorized systems is separate from mechanical installation.
Read article →TV mounting
How high should a TV be mounted: start with the sofa
TV installation starts with bracket compatibility, screen weight and mounting hole layout. Height should suit the viewing position. Articulating brackets require assessment of wall loading and clearance when extended.
Read article →TV mounting
Old bracket and new TV: are they compatible
TV installation starts with bracket compatibility, screen weight and mounting hole layout. Height should suit the viewing position. Articulating brackets require assessment of wall loading and clearance when extended.
Read article →TV mounting
TV on a plasterboard wall: why the substrate must be inspected
TV installation starts with bracket compatibility, screen weight and mounting hole layout. Height should suit the viewing position. Articulating brackets require assessment of wall loading and clearance when extended.
Read article →TV mounting
The TV is mounted but cables spoil the view: plan ahead
TV installation starts with bracket compatibility, screen weight and mounting hole layout. Height should suit the viewing position. Articulating brackets require assessment of wall loading and clearance when extended.
Read article →TV mounting
TV in a bedroom corner: when an articulating bracket helps
TV installation starts with bracket compatibility, screen weight and mounting hole layout. Height should suit the viewing position. Articulating brackets require assessment of wall loading and clearance when extended.
Read article →Furniture
Wardrobe almost to the ceiling: is there enough room to assemble it
Wardrobe assembly covers the agreed work on the frame, shelves, doors and hardware adjustment. Hinged and sliding doors use different systems. Tall units require room to assemble and anti-tip anchoring according to instructions.
Read article →Furniture
Wardrobe doors are uneven: adjustment or assembly error
Adjusting cabinet doors, tightening joints and replacing accessible hardware can resolve everyday problems. First determine whether adjustment is enough or a replacement part is needed. Electrical and gas work requires an appropriate specialist.
Read article →Furniture
Sliding wardrobe door sticks: what should the handyman see
Wardrobe assembly covers the agreed work on the frame, shelves, doors and hardware adjustment. Hinged and sliding doors use different systems. Tall units require room to assemble and anti-tip anchoring according to instructions.
Read article →Furniture
Dresser in a child's room: why anti-tip anchoring matters
Dresser assembly includes the frame, drawers, runners and handles. Front gaps and drawer movement are checked. If the manufacturer requires anti-tip anchoring, this affects placement.
Read article →Furniture
Bed squeaks after moving: what may have changed during assembly
The frame, base and headboard are assembled according to the model. Drawers, lift mechanisms and additional supports affect the work. Connections and moving parts are checked after assembly.
Read article →Furniture
Bed with a lift mechanism: what to agree before assembly
The frame, base and headboard are assembled according to the model. Drawers, lift mechanisms and additional supports affect the work. Connections and moving parts are checked after assembly.
Read article →Furniture
Desk in a small room: how to plan assembly and shelves
Desk legs, top, drawers and stability are checked. Height-adjustable models require following instructions and allowing movement space. Cables should not pull tight when the position changes.
Read article →Furniture
Bought a used wardrobe: what to check before reassembly
Wardrobe assembly covers the agreed work on the frame, shelves, doors and hardware adjustment. Hinged and sliding doors use different systems. Tall units require room to assemble and anti-tip anchoring according to instructions.
Read article →Mounting & storage
Bookshelf instead of decor: why the mounting requirements change
Fixings depend on the wall, shelf design and intended load. Books and light decorations can require different mounting solutions. Concealed supports must match the shelf and suitable installation depth.
Read article →Mounting & storage
Floating shelf is leaning: where to look for the cause
Fixings depend on the wall, shelf design and intended load. Books and light decorations can require different mounting solutions. Concealed supports must match the shelf and suitable installation depth.
Read article →Mounting & storage
Narrow entryway: where to place a coat rack, mirror and organizer
Coat racks need a suitable height, door clearance and allowance for clothing weight. Panels with multiple hooks require checking the mounting holes. The rack should not obstruct passages or furniture.
Read article →Mounting & storage
Dividing a room with shelving: what to check before buying
Floor-standing anti-tip anchoring differs from supporting a suspended divider. Heavy units require assessment of supports, loads and the wall or ceiling substrate. Appearance alone cannot determine the mounting method.
Read article →Mounting & storage
Heavy metal shelving: assembly and anchoring are different jobs
Shelving is assembled to the manufacturer’s diagram and positioned in place. Tall units require stability checks and specified anchoring. Intended loads must remain within shelf limits.
Read article →Mirrors & decor
Large hallway mirror: preparing the location and handling
Mirror weight, wall substrate and factory hanging points determine the installation approach. Agree height and position relative to furniture before drilling. Handling large mirrors may require a second installer. Hallway, bedroom and bathroom mirrors can be mounted where the substrate is suitable. Electrical connection of illuminated mirrors is arranged with a licensed electrician.
Read article →Mirrors & decor
Mirror on tile: why the layout must be agreed in advance
Mirror weight, wall substrate and factory hanging points determine the installation approach. Agree height and position relative to furniture before drilling. Handling large mirrors may require a second installer. Hallway, bedroom and bathroom mirrors can be mounted where the substrate is suitable. Electrical connection of illuminated mirrors is arranged with a licensed electrician.
Read article →Mirrors & decor
Illuminated mirror: separate hanging from electrical connection
Mirror weight, wall substrate and factory hanging points determine the installation approach. Agree height and position relative to furniture before drilling. Handling large mirrors may require a second installer. Hallway, bedroom and bathroom mirrors can be mounted where the substrate is suitable. Electrical connection of illuminated mirrors is arranged with a licensed electrician.
Read article →Mirrors & decor
Picture gallery wall: how to lay it out without extra holes
Layout depends on composition size, weight and hanging fittings. Groups of pictures benefit from an agreed marking plan. Heavy panels need an assessment of the substrate and mounting points.
Read article →Mirrors & decor
Mirror opposite a window: check the position before hanging
Mirror weight, wall substrate and factory hanging points determine the installation approach. Agree height and position relative to furniture before drilling. Handling large mirrors may require a second installer. Hallway, bedroom and bathroom mirrors can be mounted where the substrate is suitable. Electrical connection of illuminated mirrors is arranged with a licensed electrician.
Read article →Balcony & windows
Ceiling laundry rack on a balcony: what can block its movement
Wall and ceiling racks must account for wet laundry loads and moving mechanisms. Check window and door clearances. Mounting suitability depends on the substrate and model requirements.
Read article →Balcony & windows
Laundry rack fixing is loose: why reducing the load is not a repair
Wall and ceiling racks must account for wet laundry loads and moving mechanisms. Check window and door clearances. Mounting suitability depends on the substrate and model requirements.
Read article →Balcony & windows
Mosquito screen does not close: replace the mesh or the frame
A ready-made insect screen must match the window opening and frame system. Installation depends on tracks, frame and access. Replacing mesh in an existing frame differs from making a new frame.
Read article →Doors & hardware
Loose door handle: when tightening is enough and when to replace it
Replacement handles must fit the door, mechanism and mounting holes. Looseness can come from fixings or worn parts. A new handle does not necessarily fix a faulty lock.
Read article →Doors & hardware
Hinge pulled out of a cabinet door: will a new hinge help
Adjusting cabinet doors, tightening joints and replacing accessible hardware can resolve everyday problems. First determine whether adjustment is enough or a replacement part is needed. Electrical and gas work requires an appropriate specialist.
Read article →Taps & water
Kitchen tap drips: repair the mixer or replace it
Replacing a kitchen or basin mixer includes agreed removal, fitting a compatible model and checking connections for leaks. Access beneath the sink and isolation valve condition are assessed first. Damaged hoses, seized connections or pipe repairs may require extra work.
Read article →Taps & water
Water under the sink: what to show before replacing the tap
Replacing a kitchen or basin mixer includes agreed removal, fitting a compatible model and checking connections for leaks. Access beneath the sink and isolation valve condition are assessed first. Damaged hoses, seized connections or pipe repairs may require extra work.
Read article →Taps & water
New mixer tap: how to check compatibility before buying
Replacing a kitchen or basin mixer includes agreed removal, fitting a compatible model and checking connections for leaks. Access beneath the sink and isolation valve condition are assessed first. Damaged hoses, seized connections or pipe repairs may require extra work.
Read article →Taps & water
Old tap will not come off: why removal affects the price
Replacing a kitchen or basin mixer includes agreed removal, fitting a compatible model and checking connections for leaks. Access beneath the sink and isolation valve condition are assessed first. Damaged hoses, seized connections or pipe repairs may require extra work.
Read article →
Lighting & interior
Heavy chandelier: what to assess besides the electrical point
Installation depends on weight, ceiling substrate, ceiling height and suspension length. Decorative assembly and removal of an existing fixture are agreed separately. Electrical connection requires a licensed electrician; availability and scope are confirmed when you enquire.
Read article →Lighting & interior
Pendant light above a table: furniture layout before installation
Wall and ceiling lights must suit their location and mounting system. Recessed fittings require checking cut-out dimensions and clearance behind the finish. Connection, rewiring and changes to electrical points require a licensed electrician and are discussed before booking.
Read article →Lighting & interior
Replacing a bathroom light: why the correct rating matters
Wall and ceiling lights must suit their location and mounting system. Recessed fittings require checking cut-out dimensions and clearance behind the finish. Connection, rewiring and changes to electrical points require a licensed electrician and are discussed before booking.
Read article →Furniture
A baby has arrived: which furniture fixings should be checked
Ready-made latches, restrictors and furniture anchors must suit the furniture and manufacturer’s instructions. Doors should operate correctly and fittings must be checked. These devices do not replace supervision.
Read article →Mounting & storage
Organizer on a tiled backsplash: how to avoid an awkward position
Hooks, rails and wall organizers must suit expected loads and use. On tiles, hole positions and substrate access require assessment. Multiple fittings need consistent height and convenient spacing.
Read article →Moving & planning
High ceiling and a heavy item: preparing safe access
Floor-standing anti-tip anchoring differs from supporting a suspended divider. Heavy units require assessment of supports, loads and the wall or ceiling substrate. Appearance alone cannot determine the mounting method.
Read article →TV mounting
TV bracket on a brick wall: choosing the right fixings
TV installation starts with bracket compatibility, screen weight and mounting hole layout. Height should suit the viewing position. Articulating brackets require assessment of wall loading and clearance when extended.
Read article →TV mounting
Articulating TV mount: clearance to plan before installation
TV installation starts with bracket compatibility, screen weight and mounting hole layout. Height should suit the viewing position. Articulating brackets require assessment of wall loading and clearance when extended.
Read article →TV mounting
TV and soundbar: plan height and cables together
TV installation starts with bracket compatibility, screen weight and mounting hole layout. Height should suit the viewing position. Articulating brackets require assessment of wall loading and clearance when extended.
Read article →TV mounting
Mounting a TV in a rental: what to agree with the owner
TV installation starts with bracket compatibility, screen weight and mounting hole layout. Height should suit the viewing position. Articulating brackets require assessment of wall loading and clearance when extended.
Read article →Curtains & windows
Curtain rail for a bay window: measuring angles and curtain paths
Wall-mounted rods require checking window width, bracket projection and curtain weight. Fabric should clear handles, sills and furniture. Long rods may need extra supports according to the manufacturer’s instructions.
Read article →Curtains & windows
Long curtain rod without sagging: where extra supports matter
Wall-mounted rods require checking window width, bracket projection and curtain weight. Fabric should clear handles, sills and furniture. Long rods may need extra supports according to the manufacturer’s instructions.
Read article →Curtains & windows
Double wall-mounted curtain rod: clearing the window and sill
Wall-mounted rods require checking window width, bracket projection and curtain weight. Fabric should clear handles, sills and furniture. Long rods may need extra supports according to the manufacturer’s instructions.
Read article →Curtains & windows
Curtain rods at a corner window: preventing curtain clashes
Wall-mounted rods require checking window width, bracket projection and curtain weight. Fabric should clear handles, sills and furniture. Long rods may need extra supports according to the manufacturer’s instructions.
Read article →Curtains & windows
Ceiling curtain track in concrete: accurate, level marking
Ceiling tracks can support a floor-to-ceiling curtain layout. The supporting substrate must be checked: concrete and suspended ceilings need different solutions. Rail spacing must allow fabric to move freely.
Read article →Curtains & windows
Curtain track inside a window recess: depth and sash clearance
Ceiling tracks can support a floor-to-ceiling curtain layout. The supporting substrate must be checked: concrete and suspended ceilings need different solutions. Rail spacing must allow fabric to move freely.
Read article →Furniture
Wardrobe through a narrow stairwell: check the route before delivery
Wardrobe assembly covers the agreed work on the frame, shelves, doors and hardware adjustment. Hinged and sliding doors use different systems. Tall units require room to assemble and anti-tip anchoring according to instructions.
Read article →Furniture
Wardrobe anti-tip anchoring: choosing a suitable fixing point
Wardrobe assembly covers the agreed work on the frame, shelves, doors and hardware adjustment. Hinged and sliding doors use different systems. Tall units require room to assemble and anti-tip anchoring according to instructions.
Read article →Furniture
Wardrobe back panel came loose: stabilize before adjusting doors
Wardrobe assembly covers the agreed work on the frame, shelves, doors and hardware adjustment. Hinged and sliding doors use different systems. Tall units require room to assemble and anti-tip anchoring according to instructions.
Read article →Furniture
Mirrored wardrobe door: checks after assembly
Wardrobe assembly covers the agreed work on the frame, shelves, doors and hardware adjustment. Hinged and sliding doors use different systems. Tall units require room to assemble and anti-tip anchoring according to instructions.
Read article →Furniture
Bed slat fell out: identify a broken holder before reassembly
The frame, base and headboard are assembled according to the model. Drawers, lift mechanisms and additional supports affect the work. Connections and moving parts are checked after assembly.
Read article →Furniture
Bed headboard pulling away from the wall: joints to inspect
The frame, base and headboard are assembled according to the model. Drawers, lift mechanisms and additional supports affect the work. Connections and moving parts are checked after assembly.
Read article →Furniture
Monitor arm on a desk: check tabletop thickness and clamp clearance
Desk legs, top, drawers and stability are checked. Height-adjustable models require following instructions and allowing movement space. Cables should not pull tight when the position changes.
Read article →Furniture
Desk and shelf above it: align the layout before mounting
Fixings depend on the wall, shelf design and intended load. Books and light decorations can require different mounting solutions. Concealed supports must match the shelf and suitable installation depth.
Read article →Mounting & storage
Floating shelf hardware: check thickness and part compatibility
Fixings depend on the wall, shelf design and intended load. Books and light decorations can require different mounting solutions. Concealed supports must match the shelf and suitable installation depth.
Read article →Mounting & storage
Shelf above a sofa: plan a comfortable, secure position
Fixings depend on the wall, shelf design and intended load. Books and light decorations can require different mounting solutions. Concealed supports must match the shelf and suitable installation depth.
Read article →Mounting & storage
Metal shelving wobbles: check the floor and adjustable feet
Shelving is assembled to the manufacturer’s diagram and positioned in place. Tall units require stability checks and specified anchoring. Intended loads must remain within shelf limits.
Read article →Mounting & storage
How to distribute weight across a shelving unit
Shelving is assembled to the manufacturer’s diagram and positioned in place. Tall units require stability checks and specified anchoring. Intended loads must remain within shelf limits.
Read article →Mounting & storage
Room-divider shelving: stability when it cannot attach to a wall
Floor-standing anti-tip anchoring differs from supporting a suspended divider. Heavy units require assessment of supports, loads and the wall or ceiling substrate. Appearance alone cannot determine the mounting method.
Read article →Mounting & storage
Ceiling tension room divider: verify ceiling type and bracing
Floor-standing anti-tip anchoring differs from supporting a suspended divider. Heavy units require assessment of supports, loads and the wall or ceiling substrate. Appearance alone cannot determine the mounting method.
Read article →Mirrors & decor
Mirror adhesive or mechanical fixings: follow the product specification
Mirror weight, wall substrate and factory hanging points determine the installation approach. Agree height and position relative to furniture before drilling. Handling large mirrors may require a second installer. Hallway, bedroom and bathroom mirrors can be mounted where the substrate is suitable. Electrical connection of illuminated mirrors is arranged with a licensed electrician.
Read article →Mirrors & decor
Bathroom mirror fogs up: could repositioning help
Mirror weight, wall substrate and factory hanging points determine the installation approach. Agree height and position relative to furniture before drilling. Handling large mirrors may require a second installer. Hallway, bedroom and bathroom mirrors can be mounted where the substrate is suitable. Electrical connection of illuminated mirrors is arranged with a licensed electrician.
Read article →Mirrors & decor
Large heavy mirror: wall preparation and safe handling
Mirror weight, wall substrate and factory hanging points determine the installation approach. Agree height and position relative to furniture before drilling. Handling large mirrors may require a second installer. Hallway, bedroom and bathroom mirrors can be mounted where the substrate is suitable. Electrical connection of illuminated mirrors is arranged with a licensed electrician.
Read article →Mirrors & decor
Picture gallery: keeping multiple frames aligned
Layout depends on composition size, weight and hanging fittings. Groups of pictures benefit from an agreed marking plan. Heavy panels need an assessment of the substrate and mounting points.
Read article →Mirrors & decor
Heavy picture with hanging wire: assess both contact points
Layout depends on composition size, weight and hanging fittings. Groups of pictures benefit from an agreed marking plan. Heavy panels need an assessment of the substrate and mounting points.
Read article →Balcony & windows
Ceiling drying rack above a balcony door: check full door clearance
Wall and ceiling racks must account for wet laundry loads and moving mechanisms. Check window and door clearances. Mounting suitability depends on the substrate and model requirements.
Read article →Balcony & windows
Ceiling dryer cord sticks: when the mechanism needs attention
Wall and ceiling racks must account for wet laundry loads and moving mechanisms. Check window and door clearances. Mounting suitability depends on the substrate and model requirements.
Read article →Balcony & windows
Custom insect screen: measure the opening accurately
A ready-made insect screen must match the window opening and frame system. Installation depends on tracks, frame and access. Replacing mesh in an existing frame differs from making a new frame.
Read article →Balcony & windows
Sliding insect screen sticks: inspect the track and rollers
A ready-made insect screen must match the window opening and frame system. Installation depends on tracks, frame and access. Replacing mesh in an existing frame differs from making a new frame.
Read article →Doors & hardware
Replacement door handle: check spindle and fixing dimensions
Replacement handles must fit the door, mechanism and mounting holes. Looseness can come from fixings or worn parts. A new handle does not necessarily fix a faulty lock.
Read article →Doors & hardware
Latch will not retract: handle or internal mechanism
Replacement handles must fit the door, mechanism and mounting holes. Looseness can come from fixings or worn parts. A new handle does not necessarily fix a faulty lock.
Read article →Doors & hardware
Door stop: choose a floor or wall mounting point
Adjusting cabinet doors, tightening joints and replacing accessible hardware can resolve everyday problems. First determine whether adjustment is enough or a replacement part is needed. Electrical and gas work requires an appropriate specialist.
Read article →Taps & water
Leak from a flexible tap hose: when to stop and isolate water
Replacing a kitchen or basin mixer includes agreed removal, fitting a compatible model and checking connections for leaks. Access beneath the sink and isolation valve condition are assessed first. Damaged hoses, seized connections or pipe repairs may require extra work.
Read article →Taps & water
Low pressure after tap replacement: what to check first
Replacing a kitchen or basin mixer includes agreed removal, fitting a compatible model and checking connections for leaks. Access beneath the sink and isolation valve condition are assessed first. Damaged hoses, seized connections or pipe repairs may require extra work.
Read article →Taps & water
Basin mixer: measure the opening before buying
Replacing a kitchen or basin mixer includes agreed removal, fitting a compatible model and checking connections for leaks. Access beneath the sink and isolation valve condition are assessed first. Damaged hoses, seized connections or pipe repairs may require extra work.
Read article →Taps & water
Toilet seat replacement: match the shape and fixings
Adjusting cabinet doors, tightening joints and replacing accessible hardware can resolve everyday problems. First determine whether adjustment is enough or a replacement part is needed. Electrical and gas work requires an appropriate specialist.
Read article →Lighting & interior
Old light fitting and new model: checks before replacement
Wall and ceiling lights must suit their location and mounting system. Recessed fittings require checking cut-out dimensions and clearance behind the finish. Connection, rewiring and changes to electrical points require a licensed electrician and are discussed before booking.
Read article →Lighting & interior
Chandelier above stairs: assess access and a safe work area
Installation depends on weight, ceiling substrate, ceiling height and suspension length. Decorative assembly and removal of an existing fixture are agreed separately. Electrical connection requires a licensed electrician; availability and scope are confirmed when you enquire.
Read article →Lighting & interior
Chandelier on a ceiling hook: when the hook is not enough
Installation depends on weight, ceiling substrate, ceiling height and suspension length. Decorative assembly and removal of an existing fixture are agreed separately. Electrical connection requires a licensed electrician; availability and scope are confirmed when you enquire.
Read article →Lighting & interior
Light switch cover pulling away: where a simple repair ends
Adjusting cabinet doors, tightening joints and replacing accessible hardware can resolve everyday problems. First determine whether adjustment is enough or a replacement part is needed. Electrical and gas work requires an appropriate specialist.
Read article →Balcony & windows
Roller blind chain: child-safety checks
Ready-made blinds can mount inside or above the opening depending on the model. Width, fabric movement and access to controls are checked. Electrical connection of motorized systems is separate from mechanical installation.
Read article →Balcony & windows
Blind chain sticks: check control side and mechanism
Ready-made blinds can mount inside or above the opening depending on the model. Width, fabric movement and access to controls are checked. Electrical connection of motorized systems is separate from mechanical installation.
Read article →Mounting & storage
Hanging decor from a ceiling: when an ordinary hook is unsuitable
Layout depends on composition size, weight and hanging fittings. Groups of pictures benefit from an agreed marking plan. Heavy panels need an assessment of the substrate and mounting points.
Read article →Balcony & windows
Balcony dryer on tiled walls: the substrate behind tile matters
Wall and ceiling racks must account for wet laundry loads and moving mechanisms. Check window and door clearances. Mounting suitability depends on the substrate and model requirements.
Read article →Mounting & storage
Entryway coat rack: choose a height for adults and children
Coat racks need a suitable height, door clearance and allowance for clothing weight. Panels with multiple hooks require checking the mounting holes. The rack should not obstruct passages or furniture.
Read article →Mounting & storage
Coat rack on a hollow wall: match fixings to the substrate
Coat racks need a suitable height, door clearance and allowance for clothing weight. Panels with multiple hooks require checking the mounting holes. The rack should not obstruct passages or furniture.
Read article →