Planning and installation · Practical guide
Wall-mounted TV: keep HDMI and other ports accessible
A television can sit perfectly opposite the sofa while making a new console surprisingly difficult to connect. Discuss HDMI, aerial and power access before choosing the final wall position, particularly when the screen is meant to sit close to the wall.
Use the connection diagram for your exact TV
Find the port layout in the television manual and photograph its rear panel. Connections may face sideways, downwards or backwards; screen size alone tells you nothing about that layout. List the ports already occupied and those you expect to use later. Manufacturers identify rear-port limitations for some TV and slim-bracket combinations. Check the relevant instructions rather than assuming that a bracket product photo proves every socket will remain reachable.
Allow for the real plug, not just the socket
A socket opening does not show the space occupied by the plug body and the cable leaving it. Show the installer your actual HDMI leads, aerial connector and power plug. Do not plan around forcing a sharp bend immediately behind the television. An angled adapter also needs checking for orientation, size and connection requirements; it is not an automatic solution for every screen or cable arrangement.
Separate daily access from occasional servicing
You may want to insert a USB drive often but replace a fixed cable only occasionally. Agree which connections should remain reachable without removing the screen and how the manufacturer intends servicing to work. A moving bracket can sometimes help, but wall suitability, load and room clearance still matter. Do not pull an already mounted television away from the wall or remove it just to reach a port without first identifying its retaining system.
Prepare a TV installation request in Herzliya
Send Dima the television and bracket models, a wide wall photograph and the rear-panel layout. Include the device list, pictures of the plugs and your preferred distance from the wall. Say whether the television is already installed: removal, remounting and a cable channel may be separate parts of the job. This helps discuss compatibility and scope before the visit without promising access to every connection in advance.
Manufacturer documentation
What to send the handyman
- TV and bracket models, with available instructions.
- Photographs of the ports, actual plugs and entire wall.
- Devices already connected and equipment planned later.
- Daily access needs, whether the TV is mounted, and your city.
FIX&GO · animated advertisement
A random episode in English
Animated advertisement, not footage of an actual job. Muted autoplay; pauses when off screen.
Photos, measurements, product model and city help clarify the work before a visit.
Common questions
Does every slim bracket leave HDMI accessible?
No. Access depends on the port layout, plugs and installation arrangement. Check both the TV and bracket instructions.
Should I buy an angled adapter first?
Confirm dimensions, exit direction and connection requirements first. The wrong adapter can take up more space or be unsuitable for the connection.
Can I pull the screen forward to change a lead?
Avoid guessing. Retaining clips and removal methods differ between brackets; arrange suitable access with the installer.
Prices and terms
Prices and terms · Discuss the service in your city · Articles