TV mounting · Practical guide
Why a wall-mounted TV goes crooked when pulled out
A TV can look level against the wall and crooked once you pull it forward. Start by identifying the exact arm position where the change appears. That observation helps an installer tell whether the mount needs leveling or whether there is a loose joint, a moving wall plate or a viewing-angle effect.

Compare straight-on views
Take a straight-on photo of the upper edge of the TV in its usual resting position. Furniture lines and an angled view from the sofa can make a screen look uneven. If the bracket is stable, take a second photo from directly in front of the screen at its usual extended position.
Note when the angle changes
Does the same corner drop when the arm comes straight out, or only when it swings left or right? Write down the position. Stop moving the TV if you notice a new gap behind the wall plate, cracking around an anchor, a sudden clunk or obvious looseness.
Look up the exact bracket model
Some mounts support a post-installation level adjustment. SANUS, for example, lists it for model FMF418KIT. Other models use different arrangements. Leave fasteners alone until the adjustment point and the hardware holding the screen are positively identified. Look for a product label or purchase record.
Show how the cables move
An HDMI lead or bundled cable can pull tight at one point of travel or get caught near a joint. In a position you can inspect safely, look for slack and note any pinching. Cable routing and a wall plate that moves are separate observations for the installer.
Manufacturer documentation
What to send the handyman
- TV and mount model numbers
- Straight-on photo of the TV
- Arm position where the tilt appears
- Photo of the wall plate and cables
FIX&GO · animated advertisement
A random episode in English
Animated advertisement, not footage of an actual job. Muted autoplay; pauses when off screen.
Photos, measurements, product model and city help clarify the work before a visit.
Common questions
Can I turn the screw behind the TV?
First identify its purpose in the model instructions. A moving wall plate calls for an inspection before any screen adjustment.
Why does it only happen to one side?
Perspective and arm position change with the direction of travel. Note whether you see the same effect every time at that angle.
Do I need a new bracket?
An inspection can establish if the existing model fits the TV and is secure, or whether parts or the whole bracket need replacement.
Prices and terms
Prices and terms · All services · TV mounting in Ramat Gan · Articles