Furniture assembly · Practical guide
Wardrobe drawer hits the door hinge. What to check
An internal drawer that runs smoothly until it reaches an open wardrobe door may be striking a hinge or the edge of the door. Finding the first point of contact is the quickest way to narrow down the problem, especially if you added drawers to an existing wardrobe.

Watch an empty drawer move
Take everything out and slide the drawer forward gently. Stop as soon as you feel resistance. Look for the first point of contact. The drawer front may brush the door edge, or the drawer side may hit a hinge. If there is no contact, check the alignment of the runners separately.
Check how far the door can open
Compare the usual opening position with the full travel allowed by the hinge. A bedside table, adjacent handle or side wall can limit door travel even when the cabinet is assembled correctly. A short video from the side makes this much easier to see.
Check the fitting diagrams for your model
Cabinet width is only one part of compatibility. Look up manuals for the frame, doors, hinges and drawer. For example, IKEA specifies different middle-hinge positions on certain PAX frames depending on which way the door opens. Use the diagram for your own combination before moving the runners.
Check the space for a new position
If the manual permits moving the drawer, check clearance above and below and make sure the matching holes place both runners at the same height. Do not force the drawer or drill extra holes based on the width alone. Stop using the drawer if the runner or hinge is loose.
Manufacturer documentation
What to send the handyman
- Full photo of the open wardrobe
- Close-up of the contact point
- Frame, drawer and hinge models
- Short video of the empty drawer
FIX&GO · animated advertisement
A random episode in English
Animated advertisement, not footage of an actual job. Muted autoplay; pauses when off screen.
Photos, measurements, product model and city help clarify the work before a visit.
Common questions
Can moving the drawer up solve it?
Sometimes. First check that the manufacturer allows the new runner position and that the drawer will clear the shelf and hinge.
Does a wide-angle hinge help?
It can help if the hinge is compatible and there is room for the door to open farther. Check the obstruction beside the wardrobe first.
Should I remove the door to test the drawer?
A first inspection usually only requires opening the door and locating the contact. Ask for help if a heavy door needs to come off.
Prices and terms
Prices and terms · All services · Wardrobe assembly in Petah Tikva · Articles